QTM-1MAC Line Taps
;)
The Ultimate in Line Piercing Valves
Install valve. Connect charging hose. Service. That’s all there is to it! MAC features Uniport: 1 connection for piercing and servicing. Sealed with refrigerant resistant “O” rings. Needle automatically back seats after servicing, leaving line free of restriction. Connect to tubing with 2 socket-head screws. (Hex wrench is included with each valve.) Needle depressor is inserted into head of needle. Wing cap is turned down easily by hand until line is pierced. Wing cap is removed and system may be serviced with any charging hose with built-in depressor. When hose is removed, spring loaded needle back-seats forming a leak proof seal. Needle depressor is discarded and wing cap forms extra precautionary seal.
QT-100Insta-Tap
;)
Refrigerant Recovery Tool
The fastest, easiest way to evacuate refrigerant before disposal of a unit. Snaps onto refrigerant line for full and immediate flow. Punctures super large hole for maximum full flow discharge to recovery unit. One tool fits all sizes from 4.76mm to 22.2mm O.D. hard tubing. Replaceable needle.
Line Tap and Swivel Valves
The quick, safe and easy option to charge, discharge and test a line. Simply clamp on the DLT valve, attach the DCV-1G control valve, and pierce the line. The control valve features a port for connecting charging lines or gauges. The valve can swivel to any position and also be removed and re-used. These line tap valves are also difficult to tamper with as the line can only be accessed by using the special DCV-1G valve. They feature a specially formulated gasket which can withstand heat up to 150ÅãC. Available in four sizes from 4.8mm O.D. tube size to 9.5mm. The DCV-1G is designed for use with all four sizes. DLT series line taps are also compatible with existing A-1 Components CV-1G valves and likewise DCV-1G valves are compatible with A-1 Components LT-series line taps.